Kemper KHS Hygiene Flush Box PRO Instructions D'installation Et D'utilisation page 23

1.4
PURE controller
LITE controller
Function
The PURE version of the controller is operated via the built-in rotary
push-button. The interval between two fl ushing cycles, together with
the fl ush duration of a fl ushing cycle, can be set on the controller.
The V1 and V2 LEDs serve as status indicators for the respective wa-
ter exchange group. The displays above are for the interval between
the fl ushing cycles and the fl ush duration of the fl ushing cycles.
Flow and temperature values cannot be logged with this controller
version.
Danger! Electricity!
We advise connecting an 0.03-A residual-current device
upstream for personal protection.
Info!
PURE status lights
V1 / V2
green
yellow
blue
red
red & blue
Interval time (h) + fl ush duration (min)
green
fl ushing green
The LITE version of the controller does not contain any operating or
display elements and does not have its own fl ushing logic. To use
the functions of a controller, it must be operated via an external
building management system (BMS). The controller is connected to
the fl ow/temperature sensor and can transmit data on fl ow rate and
temperature. The fl ushing cycles are controlled by controlling the
solenoid valves via the BMS.
© www.kemper-group.com – 07.2023 / K410068903016-00 – 23 /108
In function
Water exchange group selection
Flushing active
Error
Flushing active and current error
Selection
Selection confi rmed