Kemper KHS Hygiene Flush Box PRO Instructions D'installation Et D'utilisation page 16

EN
Sources of danger
Danger! Electricity!
Danger of fatal electric shock!
Work on live components entails an immediate risk of a
fatal electric shock.
Work on the plant may only be carried out by plumbing
and electrical specialists.
Disconnect the plant before carrying out work on it.
Keep the working environment dry.
We recommend connecting an earth leak circuit breaker
with 0.03 A upstream of the hygiene flush box PRO &
PURE for personal protection.
Warning!
Health hazard from residues in feed pipes! After installation,
addition of accessories or maintenance work, there may
be microbiological residues in the feed pipes.
Always flush the feed pipes in accordance with
EN 806-5 and VDI/DVGW 6023 after carrying out such work.
Explanation of symbols
Wi-Fi / WLAN
Fastening set
Maintenance cut-off closed
Maintenance cut-off open
Interval time
h
Flushing
Automatic storage of presets
16 /108 – K410068903016-00 / 07.2023 – © www.kemper-group.com
Warning!
Risk of injury due to improper installation!
Improper installation of the plumbing and electrical parts
can create a risk of injury.
Assembly, repair and maintenance may only be carried
out by a plumbing specialist and/or qualified electrician.
Follow the instructions and connection notes in this
manual.
Observe the requirements for output, dimensions and
area of application specified in the technical data.
Follow the national and regional standards and regulations
for plumbing and electrical installation and accident
prevention.
Note!
Equipment damage before commissioning!
Damage to the KHS Hygiene Flush Box can result in
functional limitations.
Carry out a visual inspection for damage before starting
commissioning.
Available water pressure
Operating mode
BMS (building management system)
Manual flushing
min
Flush duration
Spray pattern not OK