Publicité
Les langues disponibles
Les langues disponibles
Activation and adjustment of the Timer function
When the appliance is functioning (both in "power" and in "temperature" modes), it is possible to
activate the Timer function that stops the heating when the set time expires. To activate the timer,
press the TIMER key while the appliance is functioning: the light over the TIMER key will light up and
on the display the value "0:00" (representing the time in hours/minutes that the appliance will
function before automatically turning off the heating) will start blinking. Increase or decrease the
time with the keys "+" and "-" (at each pressing the time will be increased or decreased by one
minute steps. To quickly increase/decrease the value, keep the keys "+" or "-" pressed). Once the
timer is set, the appliance will continue to function in the set mode for the set time, after which it
will automatically switch to the OFF mode, stopping the heating function. While functioning with
the timer mode set, the display will alternatively show the power/temperature currently set and the
residual working time. During the functioning with the timer function, the operator can always
increase or decrease the heating power or the set temperature by means of the keys "+" and "-",
while pressing the MENU key to change the functioning mode will automatically turn off the timer
function (in DT700 model, the timer is canceled by pressing the TIMER button).
Keys LOCK function
The keys lock function can be activated by keeping the LOCK key pressed for more than 3 seconds
(in DT700 model it is activated by pressing the "+" and "-" keys simultaneously for more than 3
seconds). The light over the LOCK key will light up and all the keys with the exception of the ON/OFF
key will stop working to prevent any unwanted pressing that may change the set woking mode,
power, temperature, timer etc.
To deactivate the keys lock function, keep the LOCK key (in DT700 model the "+" and "-" keys
simultaneously) pressed for more than 3 seconds, until the light over the LOCK key will turn off.
Automatic shutdown (only DT700 model)
When the appliance is functioning (both in "power" and in "temperature" modes) the unit will turn
off automatically if there is no operation within 2 hours.
6. Cleaning and servicing
6.1 Safety instructions
Disconnect the appliance from the mains electricity supply (pull out the plug from the socket
if present) before cleaning the appliance or starting any servicing or repair activities, and, if it
has been used in the last 15-20 minutes, wait until the cooking surface cools down completely.
Do not use aggressive detergent products and take care to ensure that water does not enters
inside the appliance.
To prevent electric shocks, never immerse the appliance, the power supply cable or the plug in
water or any other liquid.
WARNING!
The appliance was not designed to be cleaned:
27
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
using a water jet;
using a high-pressure water jet;
by plunging it in water or another liquid.
- 27 -
Publicité
