Kenwood TK-7360 Mode D'emploi page 9

F R
RONT AND EAR
①
(Power) switch
Press to switch the transceiver ON or OFF.
②
/ keys
Press to activate their programmable functions {page 5}.
③
/ keys
Press to activate their programmable functions {page 5}.
④ TX/RX Indicator
Lights red while transmitting and green while receiving a signal. Flashes orange when receiving
an optional signaling call.
⑤ Microphone jack
Insert the microphone plug into this jack.
⑥ Status Indicator
Lights blue during a specifi ed mode, based on dealer programming.
/ S / A / <B / C> / ■ keys
⑦
Press to activate their programmable functions {page 5}.
⑧ Speaker
Internal speaker.
⑨ PTT switch
Press this switch, then speak into the microphone to call a station.
⑩ Antenna connector
Connect the antenna to this connector.
⑪ ACC connector
Connect the ACC to this connector, via the KCT-60.
⑫ External speaker jack
Connect an external speaker to this jack.
⑬ Power input connector
Connect the DC Power Cable to this connector.
GETTING ACQUAINTED
V
IEWS
3