3
Press
/
(if the key assignment list selection is configured as "Enabled") or <B/C> to select the
ID of the station you want to call.
• You can also enter the station ID directly by using the keypad.
4
Press the key programmed as Call 1 to Call 3 to begin your call.
my id
Your dealer can program an ID number for your transceiver, to identify you to other parties when you
make a call. If set by your dealer, you can edit the ID.
1
If the ID number can be edited, it will appear on the display when you turn the transceiver power
ON.
2
Press <B or C> to select the digit you want to change, then press
number.
3
Press S or
to complete the entry.
t
rAnSmitting
1
Select your desired zone and channel.
2
Press the key programmed as Selcall.
3
Press <B or C> to select a digit, then press
4
Press S to complete the entry.
5
Press the key programmed as Call 1 to Call 3 and begin your conversation.
Note: Additionally, you can also use the keys programmed as Digit 1x Down, Digit 1x Up, Digit
10x Down, and Digit 10x Up to adjust the Selcall number. Digit 1x Up/Down increases/decreases
the Selcall number by 1 each time the key is pressed. Digit 10x Up/Down increases/decreases
the Selcall number by 10 each time the key is pressed.
r
eceiVing
When you receive a signal containing the correct tones, squelch opens and you will hear the call. To
respond to the call, press the PTT switch and speak into the microphone.
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by JVCKENWOOD
Corporation.
Note: If set up by your dealer, your transceiver may use the MDC-1200 feature in place of
FleetSync. MDC-1200 and FleetSync cannot be operated simultaneously.
S
(S
elcAll
electiVe
A Selcall is a voice call to a particular station or to a group of stations.
n Transmitting
1
Select your desired zone and channel.
2
Press the key programmed as Selcall or Selcall + Status.
/
c
)
Alling
/
to increment/decrement the
to increment/decrement the number.
11