Kenwood TK-7360 Mode D'emploi page 16

Q T (QT)/ D
UIET ALK
Your dealer may have programmed QT or DQT signaling on your transceiver channels. A QT tone/
DQT code is a sub-audible tone/code which allows you to ignore (not hear) calls from other parties
who are using the same channel.
O S
PTIONAL IGNALING
Your dealer may also program several types of optional signaling for your transceiver channels.
5-Tone Signaling: Refer to "5-TONE SIGNALING" on page 10.
DTMF Signaling: DTMF Signaling opens the squelch only when the transceiver receives a call
containing a matching DTMF code.
FleetSync Signaling: Refer to "S
MDC-1200: MDC-1200 is a data system using Audio Frequency Shift Keying (AFSK). MDC-1200
signaling opens the squelch only when the transceiver receives a call with a matching MDC-1200 ID
code.
O S
PERATOR ELECTABLE
You can change the preset encode and decode tones for the selected channel. Up to 40 OST pairs
can be pre-programmed by your dealer.
1 Select your desired channel.
2 Press and hold the key programmed as OST.
• "TONE" appears on the display, followed by the current OST number.
3 Press / (if the key assignment list selection is confi gured as "Enabled") or <B/C> to select your
desired OST number.
• You can also directly enter a number from 01 to 40 using the keypad.
4 Use the transceiver the same as in a regular call.
5 To exit OST mode and return to the preset encode/decode tones, press
5-tone Signaling opens the squelch only when the transceiver receives a matching call. Transceivers
that do not transmit the correct tones will not be heard.
Note: Your transceiver functions can include either 5-tone Signaling or FleetSync/ MDC-1200.
M S
AKING A ELCALL
A Selcall is a voice call to a particular station or to a group of stations.
1 Select your desired zone and channel.
2 Press the key programmed as Selcall.
10
SIGNALING
Q T
IGITAL UIET ALK
(S
ELCALL ELECTIVE
T (OST)
ONE
5-TONE SIGNALING
(S C
ELECTIVE ALLING
(DQT)
C )" on page 11.
ALLING
)
.