Control Of Fan Speed; External Air Intake - Olimpia splendid UNICO Série Manuel D'installation

Masquer les pouces Voir aussi pour UNICO Série:

Table des Matières

Les langues disponibles

To adjust vertical airflow you can operate in two ways:

- continuous oscillation of airflow, obtained by pressing

button T9 which starts and stops the movable grating.

This enables the fins on the grating to turn completely

around.

- stop the movable grating in the desired position by

pressing button T9 again while the fins are in motion.

Pressing button T9 will start automatic turning of the baffle.

IMPORTANT: The baffle must not be turned by hand.

3.4.10

Fan speed is controlled by button T5.

Control of fan

Pressing this button gives the following sequence:

speed

once=Low, twice=Medium, three times=High, four

times=Automatic.

The higher the speed setting, the greater the output of

the air conditioner but also the louder its operation.

If you select Automatic mode, the microprocessor in the

air conditioner adjusts the speed automatically, keeping

it as high as needed to reach the temperature setting

with respect to the effective room temperature.

As the room temperature nears the setting, fan speed

is reduced automatically.

When the unit is operating in dehumidification mode,

fan speed adjustment is not possible as it can only

function at low speed.

3.4.11

This function is available only on devices equipped with

External air intake

the optional external air intake, that is an exclusive

feature for this type of air conditioner.

Press button T8 once to start the microfan on the

external air intake and open the shutter to refresh the

air in the room.

Press button T8 again to close the shutter.

It should be borne in mind that opening the external

air intake reduces the cooling effect of the air

conditioner.

This is also true of the heating effect for machines

equipped with a heat pump.

For this reason, if you want to maintain a constant flow

of external air with the air conditioner in operation, you

should first make sure your unit is powerful enough to

operate this way.

If not, you should close the external air intake when

the temperature outside is extreme.

UNICO-HE

Fig. 35