DENTAURUM LinguSet Mode D'emploi page 22

3.4 Securing anterior brackets on the positioning jigs
10
11
12
The green Elasto-Force chain with bar (REF 774-230-00) has been used in these instructions for use instead of the
1)
transparent magic SUPER Elasto-Force chain with bar (REF 774-210-00) to show clearly the individual steps for securing
®
the anterior brackets on the positioning holders. Only the magic
should be used for ligating the treatment arches intraorally.
Remove the LinguSet bracket holders (Fig. 1, No. 8) from
the accessories tray (Fig. 1, No. 9). The anterior bracket
holders are provided with laser markings to avoid any
confusion.
Separate four chain links from the magic
Force chain with a bar (REF 774-210-00) for ligating the
1)
upper anterior brackets.
Extend the last chain link with bracket clamping tweezers
(eg REF 025-277-00) and place it over the anterior
bracket holder.
Then fit one magic SUPER Elasto-Force chain
®
each bracket holder of the anterior teeth to ensure the
brackets are securely and optimally positioned.
Fit all the anterior brackets to the relevant bracket holder.
The magic SUPER Elasto-Force chain
®
slot of the bracket, ligating it very securely on the bracket
holder, as seen in the adjacent figure.
SUPER Elasto-Force chain with bar (REF 774-210-00)
®
SUPER Elasto-
®
over
1)
fastens into the
1)

linguset en 6