Keyboard Block" Function; On Block" Function; Maintenance - Tesmed Max 830 Mode D'emploi

The system automatically resets itself once the intensity value increases. Make sure the electrode is
connected properly and then use key
If the problem persists, the equipment repeats the error warning: check the state of the cables and that
the electrodes adhere properly to the body. The error warning may be delayed when using low intensity
values, or even not detected, as it is influenced by the difference in each person's resistance.

"Keyboard block" function

Press key and, at the same time, press key
(fig. 18 pag 125). Follow the same procedure to unblock the keyboard.
This function, when enabled, disables all the keys and so avoids the risk of accidental changes to the
set parameters during treatment.

"ON block" function

Press key , and, at the same time, press key
appear on the display (fig. 19 pag 125). Follow the same procedure to switch the equipment on.
We recommend using this function when storing the equipment in its case or bag, thus avoiding the risk
of accidentally switching it on.

maintenance

The Tesmed Max 830 is a highly sophisticated product and must be handled with care. The maintenance
tips below will help you ensure its long life.
• Do not allow it to get wet. Rain, humidity and liquids or condensation generally contain corrosive
mineral substances that can damage the electronic circuits.
• Keep the Tesmed Max 830 out of the reach of children.
• Do not leave the Tesmed Max 830 in particularly hot rooms. Excessive temperatures can affect the
life of the electronic circuits, damage the batteries and deform the plastic parts.
• Do not leave the Tesmed Max 830 in particularly cold rooms, as condensation could form when it
heats up during use and so damage the electrical circuits.
• Do not open the Tesmed Max 830. Any tampering with the equipment by inexpert people could
damage it.
• Do not allow it to fall, be knocked or shaken, as the electronic circuits inside could be irreparably
damaged.
• Do not use the battery for purposes other than those intended.
• Never use the battery charger or batteries if damaged.
• Do not short circuit the battery.
• Use only the battery charger provided. Contact Customer Service in the event of a malfunction.
• Never leave the battery in hot or cold places, such as a closed car in the height of Summer or
during the Winter, as this will reduce its capacity and life.
• Never throw used batteries in the fire!
• Follow local regulations to dispose of used batteries, e.g. recycle them. Never throw them away
with household waste.
to select the channel in error mode and adjust the intensity.
and release. Symbol
, for 3 seconds. Symbol
- 34 -
appears on the display
and the Tesmed logo