Publicité
Les langues disponibles
Les langues disponibles
11.SERVICING
11.1 Calibrated scales (read off calibration counter and GAL value)
130 •
seca 655/654
We recommend having your device serviced prior to verification.
NOTICE!
Incorrect measurements as a result of poor servicing
► Have servicing and repairs carried out exclusively by seca Service or
by an authorized service partner.
► You can find service partners in your area at www.seca.com or by
sending an e-mail to service@seca.com.
Have an authorized technician perform verification according to national legal
regulations.
Verification is necessary whenever one or more verification seals are dam-
aged or the contents of the verification counter no longer match the number
on the applicable verification counter sticker. If verification seals are dam-
aged, contact seca Service directly.
Verifications may only be performed by authorized agencies. To guarantee
this, the scale is equipped with a verification counter to record any change in
verification-related data. The GAL value used by the device can also be read
off.
If you want to check whether the scale has been properly verified, proceed as
follows:
1. Press the
key.
The Settings menu is displayed.
2. Select the About item in the menu.
3. Use the
keys to select the Verification view.
4. Read off the GAL value (figure shows example values).
Publicité
