Seca 655 Mode D'emploi page 137

12.7 Technical data, ultrasonic height measurement
Metrological data
• Measuring range, standard
• Measuring range with standing aid/BIA standing aid
• Graduations
Accuracy:
Measuring range: 100 to 200 cm
Ambient conditions: 20 °C, no air movements, no air movement, no
interfering objects in the vicinity of the measuring device
Voice outputs and acoustic signals
13.OPTIONAL ACCESSORIES AND SPARE PARTS
Accessory/spare part
Switch-mode power supply:
100-240 V~ / 50-60 Hz, 12 V= / 1.5 A / 18 W
Barcode scanner
seca 463 scanner holder
seca 459 "panda bear" figure
Standing aids
Measuring rods
Configuration software
Evaluation software
Technical data, height measurement, ultrasonic
The device supports the measurement procedure through acoustic and
optical signals and voice outputs.
The following table provides an overview of the signals and voice outputs of
the device in the sequence of the measurement procedure:
Signal/voice output
Status LED on ultrasound head lights up
continuously
"Please stand upright and look straight
ahead."
Status LED on ultrasound head goes off
"Do not move. The measurement starts
now."
Short beeps
Long beep
"Your weight is (...) kilograms. Your height is
(...) centimeters. Your BMI is (...)."
"The measurement is completed. Please
step off the platform."
The device is ready for
measurement
Instruction to the patient
The measurement
procedure is in progress
Instruction to the patient
The measurement
procedure is in progress
The measurement
procedure is complete
Announcement of the
measuring results
Instruction to the patient
Article number
See recommendation at www.seca.com
See ➔
Compatible seca products, page 138
Optional accessories and spare parts • 137
English
60 cm – 220 cm
100 cm – 220 cm
1 mm
± 5 mm
Meaning
68 32 10 272
463 0000 009
459 0000 009