Steinberg NEUNDO SyncStation Mode D'emploi page 22

The following table shows the entire menu organization for visual reference:
Unit Clock
01–Master & Timecode 01–Clock Reference
Source
02–Frame Reference 02–System Clock Rate 02–Position Request
03–Timecode 03–Audio Pull/Vari-
Standard speed 0.1%
04–Reference 04–Audio Pull/Vari-
Frame Rate speed 4%
05–System Link 05–Wordclock A
06–System Link Input 06–Wordclock B
07–Install Template 07–Wordclock C
08–Line 2 Display 08–Wordclock D
09–AESA/AESZ
Outputs
10–Opto/SPDIF
Output
11–Wordclock
Input Rate
Following this overview of the menu system, each menu and its settings will be reviewed and explained. Most of the
SyncStation's settings can also be changed within Nuendo using the available settings window when the SyncStation is
selected as the Timecode Source in the Project Synchronization Setup dialog. Following the description of each menu,
the equivalent setting within Nuendo will be described.
P2Out P2In
01–Record Tracks 01–Device ID
02–RS422-In
Track Arming
03–Position From
22
Menu Reference
MIDI USB
01–MTC -> MIDI Out 01–MTC -> Nuendo
02–Full Position -> 02–Full Position
MIDI Out -> Nuendo
03–MIDI In 03–Nuendo
Track Arming Track Arming
04–MIDI ID 04–Nuendo MIDI ID
05–USB Driver