CAME BXV SDN4V Manuel D'installation, D'utilisation Et D'entretien page 52

FASTENING THE GEARMOTOR
Complete the adjusting, fasten the gearmotor to the plate using the washers and nuts.
ESTABLISHING THE LIMIT-SWITCH POINTS
For opening:
- open the gate ;
- fi t the opening limit-switch fi n onto the rack until the micro switch activates (spring) and fasten it using the
grub screws .
~ 20 mm
For closing:
- close the gate ;
- fi t the closing limit-switch fi n into the rack until the micro-switch is activated (spring) and fasten it using the
grub screws .
Spring
~ 20 mm