Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
⚠
WHEN CLEANING, MAINTAINING AND REPLACING PARTS, DISCONNECT THE OPERATOR
FROM THE MAINS POWER SUPPLY. (EXCLUDING POINT B)
At least every six months, perform ordinary maintenance jobs.
⚠ When performing this procedure, keep clear of the movement of the boom.
A - Wipe clean the photocells' glass with a soft, slightly water-dampened cloth. Do not use any solvents
or other chemicals.
B - Check that the photocells are working properly by waving an object between them when the gate is
moving: is the gate inverts its direction or the maneuver is stopped, the photocells are working properly.
C - Check that there are no impediments to the proper operation of the operator, such as any overgrown
vegetation that could block the photocells or any changes or yielding to the gate's structure.
Any repairs, or changes to the installation must be performed by qualifi ed staff and all jobs
logged carefully.
WHAT TO DO IF ...
ISSUES
It neither opens nor
closes
The gate opens but
does not close
⚠
If the problem cannot be solved by following the fixes in the table or if any malfunctions, anomalies,
noises, vibrations or suspicious and unexpected behavior is experienced on the system, call for qualified
assistance.
POSSIBLE CAUSES
• Power supply is missing
• The gearmotor is stuck
• The transmitter is emitting a weak signal or no
signal at all
• Control buttons or selectors stuck
• The photocells are working
POSSIBLE FIXES
• Check main power supply
• Lock the gearmotor
• Replace the batteries
• Check integrity of devices
and/or of electrical cables
• Check that there are no
obstructions in the photocells'
area of operation
Publicité
