Migatronic DELTA 160 DC HP Manuel D'instructions page 19

TECHNICAL DATA
Power source:
Mains voltage (50Hz-60Hz)
Fuse
Power, max.
Efficiency
Current range
Permitted load:
100% (40° ambient temp.)
60% (40° ambient temp.)
40% (40° ambient temp.)
20% (40° ambient temp.)
100% (20° ambient temp.)
60% (20° ambient temp.)
Open circuit voltage
Electrode diameter
Slope down
Gas post-flow
TIG-ignition
1
Application class
2
Protection class
Standards
Dimensions (LxWxH)
Weight
S
1
The machine meets the standards which are
demanded of machines working in areas where
there is an increased risk of electric shock
2
Equipment marked IP23 is designed for indoor and
outdoor applications
The machine requires periodical maintenance
DELTA
160 DC HP
and cleaning in order to avoid malfunction and
1x230 V ±15% cancellation of the guarantee.
16 A
WARNING !
8.0 kVA
Only trained and qualified staff members
0.85
can carry out maintenance and cleaning.
10-160 A
The machine must be disconnected from
MMA TIG
the mains supply (pull out the mains plug!).
95 A 110 A
Thereafter, wait around 5 minutes before
maintenance and repairing, as all capacitors
115 A 130 A
need to be discharged due to risk of shock.
160 A
160 A
Power source
105 A 115 A
- Clean the fan blades and the components in
115 A 135 A
the
65 V
compressed air as required.
1.6 – 3.25 mm
- A trained and qualified staff member must
0 – 10 sec.
carry out inspection and cleaning at least
0 – 30 sec. once a year.
HF/LIFTIG
S
IP 23
EN/IEC60974-1
EN/IEC60974-3
EN/IEC60974-10
40x18x25.5 cm
9,5 kg
19
MAINTENANCE
cooling pipe with clean, dry,