Main Functions - Meta System Meta HPA Evo Instructions De Montage

EN
Dear customer,
Before reading the user instructions in the following pages, we wish to congratulate you for choosing a Meta System
product, and we are pleased to give you some general information that will help you understand the performance of
your new alarm system.
During your absence, the alarm monitors if anyone opens any compartment of the car, disconnects the power or forces
entry into the passenger compartment by breaking a window. Using the radio remote control provided, you can enable
or disable the anti-theft system, temporarily disable some of the protection devices or close the electric windows if the
car is equipped with the Comfort system, or if an additional window closing module is installed.
• The alarm is enabled as soon as you lock the car doors by pressing key A on the radio remote control provided.
The direction indicators will fl ash twice and the LED will fl ash to signal that it has been enabled, and it will become
fully operational after 25 sec. If you want to temporarily disable the ultrasonic volumetric protection or the tilt/
shock sensor, just press key B on the radio remote control one or more times, as described in the "Disabling the
Protection Devices" chapter.
• The alarm is disabled when you unlock the doors by pressing key A on the radio remote control provided. The
direction indicators will fl ash once and the LED will be off to signal that it has been disabled.
If the radio remote control is not available, the anti-theft system will produce an visual/acoustic alarm when the door
is opened. This can be turned off by entering the Override security code or by using an electronic key, as described in
the "Emergency Override" chapter.
FUNCTIONS OF THE RADIO REMOTE CONTROL KEYS
The alarm control unit has a standard operating mode in which the radio remote control keys act as follows:
FUNCTION
Enable anti-theft KEY A
system Press once
Disable anti-theft KEY A
system Press once
Disable volumetric KEY B
protection Press once
Disable auxiliary KEY B
+ tilt protection Press twice
Disable volumetric
KEY B
+ auxiliary
Press 3 times
+ tilt protection
Panic Alarm (if
KEY B
enabled); 10 sec.
Press once
alarm cycle
KEY B
Stop alarm cycle
Press once
USER INSTRUCTIONS

MAIN FUNCTIONS

ACTION
Indicators fl ash twice
Indicators fl ash once
Indicators fl ash 3 times
Siren beeps 3 times
Indicators fl ash 4 times
Siren beeps 4 times
Indicators fl ash 5 times
Siren beeps 5 times
Indicators fl ash and siren
Indicators turn off and
20
FEEDBACK
Flashing: Off briefl y for the fi rs 26
sec. (initial immunity) then slow
Off if no alarms have occurred.
Flashing sequence if there are
Very fast fl ashing for the fi rst 26
Very fast fl ashing for the fi rst 26
Very fast fl ashing for the fi rst 26
Fast fl ashing during the alarm
sounds
siren stops
LED
fl ashing
alarms in the memory
sec.
sec.
sec.
Slow fl ashing