Installation Instructions - Meta System Meta HPA Evo Instructions De Montage

General Specifications:
Power supply
Alarm control unit consumption
Operating temperature
Immunity time
Indicator flashing during alarm
Alarm cycle time
Alarm cycles for different triggers
Protection:
Volumetric protection
Tilt/shock sensor protection
Panic Alarm
Perimeter Protection
Alarm input from auxiliary modules
Output to drive Engine Immobilizer Relay
Protection against attempted ignition
Automatic anti-theft protection
Controls and services:
Alarm Enable/Disable
Central locking
Direction indicator control output
Blinker button drive output
Alarm output for Horn/Pager relay
Control output for electric window module
Original electric window comfort control
Safety deadlock control for central locking
Emergency disable
Beeper when enabling/disabling alarm
Door open warning when enabled
Flashing LED
Compatible sirens:
WFR radio siren
M05 self-powered encoded siren
M03 piezoelectric siren
DISCONNECT THE VEHICLE BATTERY
SETTING UP THE PRODUCT
• Use the PRG007 PROGRAMMER to select the
various functions of the product.
• Software updates for the PRG007 programmer
and information about the programmable
functions are available ONLINE in the CAR-
ALARM technical area of the www.metasystem.
it website.
RADIO REMOTE CONTROLS
STANDARD RADIO RANGE
TX Mykro
BUTTON B
BUTTON A

INSTALLATION INSTRUCTIONS

TECHNICAL SPECIFICATIONS
12 Vdc (10 V - 15 V)
Disabled < 2.5 mA - Enabled < 5.5 mA
-40°C +85°C
26 sec.
0.4 sec. ON; 0.4 sec. OFF
26 sec.
95/56/EC (European standards)
Ultrasonic Echo/Doppler system, disabled by radio remote control.
Tilt or shock sensor, selected via PRG007
Pressing the radio remote control produces an alarm.
3 independent inputs for protecting the doors, boot and bonnet
Positive input, disabled by radio remote control
Negative electronic control, 1 A max
Produces an acoustic alarm when the alarm is enabled
Protection enabled via PRG007 programmer
Using supplied radio remote control (433.92 MHz)
6-wire universal, with times selected via PRG007
Positive electronic control, 5 A + 5 A max
Negative electronic control, 1 A max
Negative electronic control, 1 A max
Delayed positive electronic control
Automatic or via radio remote control.
Control enabled via PRG007 programmer
Button/LED or electronic keys (4 max)
Signal enabled via PRG007 programmer
Signals if a door, boot or bonnet are open when enabling the alarm.
Signal that displays the alarm and alarm memory status
116 dB sound level, self-powered
116 dB sound level, self-powered
114 dB sound level, not self-powered
M252
BUTTON A
BUTTON B
INSTALLING THE SIREN IN THE ENGINE COMPARTMENT
80°C
PRG007 PROGRAMMER
MetaSystem code: ABS15090
EXTENDED RADIO RANGE
M4502
BUTTON A
BUTTON B
13
EN
H 2 O
WIRING FOR Meta HPA
MetaSystem code: ABS14090
M4512
BUTTON A
BUTTON B