Publicité
Les langues disponibles
Les langues disponibles
8. Product description
8.2 Operating elements
Button
Description
ON/OFF
[Ein/Aus]
PRINT
[Drucken]
kg/lb
Zero
[Null]
Hold / Release
[Halten /
Entlasten]
BMI
UP / DOWN
[Nach oben /
unten]
CLEAR
[LÖSCHEN]
ENTER
[EINGABE]
TARE
[TARA]
Function
Switches the scale on or off.
Currently no function
Resets the scale to zero. The reset to zero within three seconds. This
function is only possible when the weight is displayed stably. Zeroing
up to 2% of the full weight.
If „HOLD" is shown in the display, pressing this key displays the cur-
rent weight value together with the „HOLD" indicator.
If „HOLD" is not shown in the display and the scale is unloaded, the
„HOLD" display goes out.
This key is not active in BMI mode.
Call up the BMI mode. Only possible if a weight is shown on the dis-
play and this function has been activated in the settings.
To set the value/number that flashes.
When the height is displayed in BMI mode, the value is reset to the
default value (170.0 cm).
If this button is pressed when the calculated final BMI value is display-
ed, the scale returns to weighing mode.
Confirmation of the last parameter entered and call up of the
next step.
Pressing and holding this key while the scale is being switched on
the ID display is called up (pre-parameter mode).
If the weight is below the maximum value (ASTART value), the manual
tare setting is called up. If the weight is above the maximum value, the
tare function is called up. During the tare function the indicators NET
[Net] & GROSS [Gross] light up.
39
Publicité
