Sunrise Medical Quickie Q500 M Manuel D'utilisation page 28

Masquer les pouces Voir aussi pour Quickie Q500 M:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DANGER!
• The wheelchair can only be secured by using the tie-down
points on the wheelchair's frame (Fig. 7.3).
• The tie-down points (2 in the front, 2 in the back) are
indicated by the tie-down symbol (Fig. 7.2). Fit the front
straps first, then the rear. Tension the straps to secure the
wheelchair. The wheelchair may not be secured onto any
accessories (wishbones, armrests, anti-tip brackets etc.).
• No changes or replacements must be made to the
anchorage points/car fastenings on the wheelchair, or to
constructional elements or parts of the frame without
consulting the manufacturer.
• When the wheelchair is transported in a vehicle without
occupant and no restraint system is available then the
wheelchair should be properly stored and secured in the
cargo area during travel.
28
Fig. 7.2
Fig. 7.3
Q500 M
A
C
Q500 F
A
A
C
Q500 R
A
A
C
Q500 H
A
A
C
A
Front Tie Down Points.
B
Rear Tie Down Points.
C
Direction of Travel.
B
B
A
B
B
B
B
B
B
Q500 M/F/R/H Rev.D

Publicité

Table des Matières
loading

Table des Matières