Stihl FSA 130 R Notice D'emploi page 41

13 Adjusting the Trimmer / Brushcutter
The hip pad is used to convert an AR L or AR backpack
battery or battery backpack into a harness for supporting the
trimmer / brushcutter. When working with an AR backpack
battery or AP battery in a battery backpack, the hip pad must
be used, for example, when working with a metal cutting
attachment.
The hip pad must be mounted on the operator's right side.
To attach the hip pad:
4
5
► Attach the quick-release fastener (5) that comes with the
hip pad to the harness strap (4).
► Attach the other quick-release fastener (6) that comes
with the hip pad to the side buckle (7).
6
8
► Connect the hip pad (8) to the harness using the quick-
release fasteners (5 and 6).
0458-725-8221-A
7
6
5
2
► Adjust the length of the hip pad strap (1) so that the
carabiner (2) is about a hand's width below the top of your
hip.
► Attach the carabiner to the carrying ring (3) on the power
tool's shaft.
13 Adjusting the Trimmer / Brushcutter
13.1 Balancing the Trimmer / Brushcutter
► Let the trimmer / brushcutter sway on the harness until it
stops moving.
The mowing head or the metal cutting attachment should
come to rest gently on the ground or just above the ground.
English
2
3
1
1
39