Stihl FSA 130 R Notice D'emploi page 42

English
3
If the trimmer / brushcutter is not properly balanced:
► Loosen the screw (3) on the carrying ring.
► Slide the carrying ring (2) along the drive tube and re-
tighten the screw.
► Allow the trimmer / brushcutter to hang freely again.
Repeat and re-adjust as necessary to achieve the proper
balance.
► Once the cutting attachment is properly positioned for
work, tighten the screw and ensure that the carrying ring
is secure.
14 Inserting and Removing the
Connecting Cord
14.1 Inserting the Connecting Cord
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 7.
40
2
14 Inserting and Removing the Connecting Cord
To insert the connecting cord:
► Line up the arrow on the connecting cord plug (2) with the
arrow on the socket (1).
► Push the plug straight into the socket with steady, even
pressure until it is fully inserted.
14.2 Removing the Connecting Cord
WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the connecting cord before
assembling, transporting, adjusting, cleaning, servicing,
maintaining or storing the trimmer / brushcutter. Remove the
connecting cord in the event of malfunction or emergency
and any time the trimmer / brushcutter is not in use.
WARNING
To reduce the risk of electric shock or personal injury from
the loss of control, always switch off the trimmer before
removing the connecting cord from the socket.
To remove the connecting cord:
► Release trigger switch.
► Pull the plug straight out of the trimmer socket with steady,
even pressure.
1
2
0458-725-8221-A