Stihl FSA 130 R Notice D'emploi page 6

English
1 Socket
Socket for the battery connecting cord.
2 Control Handle
Handle for the operator's rear hand.
3 LEDs
Indicate the unit's power level.
4 Retaining Latch
Locks / unlocks the trigger switch. Sets the unit's power
level when it is in active mode.
5 Trigger Switch Lockout
Must be depressed while the retaining latch is unlocked
to allow activation of the trigger switch.
6 Trigger Switch
Activates the cutting attachment when depressed.
7 Carrying Ring
For connecting a harness to the trimmer / brushcutter.
8 Loop Handle
Handle for the operator's front hand.
9 Barrier Bar
Designed to reduce the risk of inadvertent operator
contact with the cutting attachment. Required equipment
when operating the unit with a metal blade.
10 Drive Tube
Shaft of the power tool.
11 Opening for Stop Pin
Opening that allows the operator to block the output shaft
by inserting the stop pin.
12 Stop Pin
Blocks the output shaft when mounting a cutting
attachment.
13 Gearbox
Covers the transmission system.
14 Screw Plug
Seals the grease filler opening at the gearbox.
4
# Rating Plate
Contains electrical information and the product's serial
number.
3.2 Available Cutting Attachments and Deflectors
1
2
3
4
6
1 Deflector for Metal Cutting Attachments
Designed to reduce the risk of injury from thrown objects
and contact with the cutting attachment.
2 Grass Cutting Blade
Metal grass blade to cut matted and dry grass, ferns,
weeds and similar vegetation.
3 Brush Knife
Metal brush blade to cut through heavy grass, weeds,
brush, scrub and similar vegetation.
4 Line Limiting Blade
Metal blade on the deflector that trims the nylon mowing
line to the proper length.
5 Skirt
Converts certain STIHL deflectors for use with a mowing
head.
6 Transport Guard
Designed to reduce the risk of injury from contact with a
metal cutting attachment while transporting the unit.
3 Main Parts
4
5
8
0458-725-8221-A
7