Stihl FSA 130 R Notice D'emploi page 39

12 Using a Battery Harness
► Adjust the harness straps so that the backpack fits firmly
and securely against your back.
► Thread the end of the waist belt through the loop (3).
► To remove the harness, open the quick-release fasteners
on the waist belt and chest strap and loosen the harness
straps by lifting the sliding adjusters.
To help reduce the risk of injury in the event of an
emergency, practice quickly opening the fasteners on the
waist belt and chest strap, loosening the shoulder straps and
removing the battery.
NOTICE
To avoid damage, ease the battery to the ground when
practicing. Do not allow the battery to drop to the ground and
do not throw it.
12.3 STIHL Battery Belt
12.3.1 Mounting the AP Battery Bag to the STIHL Battery Belt
WARNING
To reduce the risk of injury from tripping or losing control of
the power tool, always secure the connecting cord with the
hook and eye fasteners. Position and secure the connecting
cord so that it will not interfere with proper working technique
or your ability to maintain control of the power tool.
0458-725-8221-A
3
WARNING
Manage the cord to prevent it from contacting the cutting
blades or catching on objects, which could cause you to lose
balance or control of the power tool, resulting in serious
personal injury and property damage.
1
2
► Open the hook and eye fastener on the strap (1) and pull
the strap out of the ring (2).
► Pull the strap through the battery belt (3).
3
1
► Pull the strap (1) back through the ring (2) and battery
belt (3).
► Fasten the hook and eye fastener.
English
1
3
1
37