Publicité
Les langues disponibles
Les langues disponibles
How to put it of a strainer and how to take off
Chemical tank
The strainer can be attached or removed by
moving the strainer so that the inner rib on either
side is either parallel or perpendicular to the
chemical tank.
4. Cleaning, Recharging, and Storage
Cleaning the inside of chemical tank
● After recovering the remnant solution, clean the inside of the
chemical tank by using water. Turn the unit off before this process.
CAUTION
Before cleaning, inspection and recharging, be sure to stop this unit.
Cleaning the pump inside with water
CAUTION
After cleaning the inside of the chemical tank, pour water into the tank again, run the pump, and
clean the pump inside and the nozzles until the sprayed mist of chemical solution is completely
replaced with clean water.
Leaving the pump inside without cleaning with water will cause failure of the pump and nozzle.
Cleaning the strainer
● Clean the strainer.
Cleaning the nozzle
● Remove the nozzle tip, packing and nozzle holder and wash.
Rib
Strainer
Chemical tank
To semi-secure the strainer, place it in the chemical
tank with the inner rib on either side either parallel or
perpendicular to the chemical tank, then turn it 45°.
This prevents the strainer from lifting when using
foaming chemicals.
- 8 -
Rib
nozzle tip
nozzle holder
45°
45°
Strainer
cap
packing
English
Publicité
