Vortice VORT HR 300 NETI Livret D'instructions page 47

ENGLISH
"FAN SPEED" page
Select "FAN SPEED" from the "INSTALL" menu to access the speed adjustment menu.
Motor speed can be adjusted depending on the system flow rates, selecting:
FAN1 = (A) Clean air supply in room
FAN 1 MIN = Minimum speed
FAN 1 MAX = Maximum speed
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
[ ▲ ]
Minimum speed %
28/28
Activate/deactivate "Un-balan." function
With the keys [▲] and [▼] select "UN-BALAN.":
YES
press the [] key:
9 9 9 9
[ ] [ ] ]
- to activate choose [YES];
- to deactivate choose [NO].
NO
Activate/deactivate "Heater" function.
YES
With the keys [▲] and [▼] select "HEATER":
press the []
9 9
9 9
[ ] ]
[ ]
- to activate choose [YES];
NO
- to deactivate choose [NO].
Activate/deactivate "Heat Forc" function.
YES
With the keys [▲] and [▼] select "HEAT FORC":
press the [] key:
9 9
9 9
[ ] ]
[ ]
- to activate choose [YES];
NO
- to deactivate choose [NO].
FAN2 = (D) Stale air supply toward outside
FAN 2 MIN = Minimum speed
FAN 2 MAX = Maximum speed
Maximum speed %
100/100
key:
[ ▲ ]
47