Stihl RB 400 Notice D'emploi page 19

Adding Detergent
Use the detergent suction hose to draw
detergent from a separate container.
The detergent is added to the water in
the high-pressure pump:
Add the detergent to a separate
N
container and dilute it with water at
the ratio specified by the detergent
manufacturer
Push the pickup body (1) as far as
N
possible into the container
Connect the black 65° nozzle to the
N
spray lance
Detergent can only be used with the low-
pressure, 65° nozzle (black).
When using the detergent suction
feature, only use 1 high-pressure hose
between the pump and spray gun.
Adding extension hoses may cause
insufficient detergent suction.
When applying detergent, start at
N
the bottom and work upwards
For best results, never allow the
detergent to dry on the surface to be
cleaned. Read and follow the detergent
manufacturer's warnings and
instructions regarding proper use.
RB 400
Cleaning the pickup body, hose and
injector
Each time after working with a
detergent, run clean water through the
1
pump to clean the hose and other
components of the pressure washer.
Immerse the pickup body in clean,
N
detergent-free water
Actuate the spray gun for
N
approx. 5 seconds to draw clean
water through the hose
Shutting off the Engine
See the Kohler owner's manual for
complete instructions on shutting off the
engine.
Shut off the engine
N
Turn off the water supply
N
Squeeze and hold the spray gun
N
trigger until water only drips from the
high-pressure nozzle and the
system is depressurized
1
2
Release the spray gun trigger (2)
N
and engage the trigger lockout (1)
English
17