Stihl RB 400 Notice D'emploi page 15

Suction hose for detergent
2
1
Attach the suction hose for
N
detergent (1) to the low-pressure
connector (2) on the pump
Storing accessories
Place the spray attachment in the
N
holder on the frame
Hang the high-pressure hose on the
N
holder on the frame
Insert the high-pressure nozzles in
N
the holders on the frame
RB 400
Connecting and Removing
the High-Pressure Hose
WARNING
To reduce the risk of severe injury from
high pressure spray, always shut off the
pressure washer and relieve any
remaining pressure in the line by
squeezing the spray gun trigger before
attempting to remove the high-pressure
hose from either the pump or the spray
gun.
Remove all sand and debris from
N
the connections
Connection to the high-pressure pump
Connecting
1
2
Push the high-pressure hose into
N
the high pressure connector (1)
Attach the union nut (2) and screw it
N
on and tighten by hand
Removing
Unscrew union nut
N
Pull the high-pressure hose off
N
pressure connector
Connection to the spray gun
Connecting
1
2
Push the high-pressure hose into
N
the coupling on the spray gun (1)
Attach the union nut (2) and screw it
N
on and tighten by hand
Removing
Unscrew the union nut
N
Pull the high-pressure hose off the
N
coupling on the spray gun
English
13