Ford VML3Z-84501A42-B Addendum page 9

DO NOT ATTEMPT TO DRIVE WITH THE TAIL PANEL
IN THE PARTIALLY OPEN POSITION!
Additional Important Operating Tips
Tonneau cover MUST be free of foreign material including snow and ice
before opening panels.
Do NOT tow your vehicle from the rear with the tonneau on your truck.
Do NOT operate vehicle with objects on top of cover.
FAILURE TO FOLLOW THESE CAUTIONS MAY RESULT IN
SEVERE DAMAGE AND WILL VOID YOUR WARRANTY!
CARE AND MAINTENANCE
REV tonneaus are made from durable materials and require simple care to ensure a long life of performing well and look -
ing great.
Cleaning the Top (Washing)
Standard automotive soap and water with a soft sponge or cloth is recommended for cleaning. Shammy dry to keep the
finish polished and brilliant. Wax is NOT recommended as it tends to fill in cracks and crevices, which may affect the tex-
tured panel finish. Do NOT use any harsh cleaners or abrasives.
Maintenance
It is recommended that you periodically check your cover is securely attached to your truck bed. Inspect the clamps and
front mounting bolts to ensure they were properly installed and have not come loose or knocked out of adjustment
during operation. Covers that are used with high frequency or that are subject to the vibrations and impact from rough
roadways can cause the cover to require adjustment.
Lubricating the Latches
It is recommended that you periodically inspect and service the latches on each panel. Clean away any excess dirt or
grime and lubricate with silicone spray. Ensure the latches move freely in and out to properly engage the side rail and
provide proper performance with optimum security. Be careful not to overspray the cover. Wipe away any excess around
the latch location.
Rev Industries HFC
Remove any snow or foreign
matter before folding cover.
Do NOT tow your vehicle from the
rear with this cover on your truck.
Part# 318A0080 Rev. 7.23.2020