Publicité
Les langues disponibles
Les langues disponibles
1
3
Rev Industries HFC
INSTALLATION SHEET
Any damaged or missing parts?
Parts will be shipped to you directly. Call 833-204-2604
Monday-Friday 8:30 am - 6:00 pm EST or email to FordCare@truck-hero.com
1x Hard folding cover assembly
1 Pair rails (L&R)
If vehicle
IS
equipped
with a drop-in bedliner
remove liner and
proceed to included
" Bedliner & Drain Tube
Routing Guideline"
now. If vehicle has
NO
drop-in bedliner
proceed to step 2.
Close tailgate. Place rail
on truck bed with silver
bracket all the way forward
and toward the center of
bed as shown. Rails should
be completely level.
HARDWARE BAG
6x Clamps (8' trucks incl. 8)
2x Elevator bolt
4x Rubber washers
2x Large flat washers
2x Lock washers
2x Star knobs
2x Buckle ends
4x Machine screws
4x Threaded posts
3x Foam bumpers
1x Bulkhead seal
2x Plug seals
2x Drain hoses
1x Installation sheet
2
4
If the truck does not
have a drop in bedliner,
install the cab/bulkhead
seal. If the truck has a
drop in bedliner, no seal
will be needed.
Make sure the rail
is clamped square
as shown.
Using a 9/16 wrench
start at the front and
place the first clamp
4-6 inches (100-
150mm) from the
bulkhead.
Part# 318A0080 Rev. 7.23.2020
Publicité
