Chapter 1
•
Setup Guide
The Setup Guide provides instructions for setting up the HP All-in-One and installing
software. Make sure you follow the steps in the Setup Guide in order.
If you have problems during setup, see Troubleshooting in the last section of the
Setup Guide, or see
•
Onscreen Help
The onscreen Help provides detailed instructions on features of the HP All-in-One
that are not described in this User Guide, including features that are only available
using the software you installed with the HP All-in-One.
•
www.hp.com/support
If you have Internet access, you can get help and support from the HP Web site. This
Web site offers technical support, drivers, supplies, and ordering information.
Load originals and load paper
You can copy or scan up to letter- or A4-size originals by loading them on the glass.
To load an original on the scanner glass
1.
Lift the lid on the HP All-in-One.
2.
Load your original print side down on the right front corner of the glass.
TIP:
edge of the glass.
3.
Close the lid.
To load full-size paper
1.
Raise the output tray to load paper into the main input tray.
2.
Slide the paper-width guide to its outermost position.
8
HP Photosmart C5200 All-in-One series
"Troubleshooting and support" on page 19
For more help on loading an original, refer to the engraved guides along the
in this guide.