HP Photosmart C5200 Serie Guide D'utilisation page 13

To view and select photos
1. Insert a memory card into the appropriate slot on the HP All-in-One.
The Photosmart Express menu appears, with the most recent photo shown on the
display.
2. Load up to 13 x 18 cm (5 x 7 inch) photo paper in the photo tray or full-size photo
paper in the main input tray.
3. Press
The View Photos screen appears.
4. Press
5. When the thumbnail of the photo you want to view is highlighted, press OK.
6. When the photo appears by itself on the display, press OK again.
The Photo Options screen appears.
7. With Print Preview highlighted, press OK.
The Print Preview screen appears, showing how your photo will look when printed.
8. If you want to select additional photos to view and print, press
More, press OK, and repeat steps 4-6.
Or, once you're in the Add Photos screen, the quickest way to select multiple photos
(if you don't need the option to edit them) is to press
press
9. (Optional) If you want to check and/or modify any of your print settings, press
highlight Settings and press OK.
10. To print the photo(s), use
button on the control panel).
A print status screen displays the number of pages to print and the estimated time to
complete.
Scan an image
You can start a scan from your computer or from the control panel of the HP All-in-One.
This section explains how to scan from the control panel of the HP All-in-One only.
NOTE:
images. Using this software, you can edit a scanned image and create special projects
using a scanned image.
Scan an original to a computer
You can scan originals placed on the glass by using the control panel.
To scan to a computer
1. Load your original print side down on the right front corner of the glass.
2. Press Scan Menu.
3. Press OK to select the default application to receive the scan, or press
different application, and then press OK.
A preview image of the scan appears on your computer, where you can edit it.
4. Make any edits to the preview image, and then click Accept when you are finished.
until View is highlighted, and then press OK.
or to scroll through the thumbnails of your photos.
or to scroll through more photos to select.
or
You can also use the software you installed with the HP All-in-One to scan
to select a photo, and then
to highlight Print Now (or press the Print Photos
to highlight Add
to
to select a
Scan an image 13