Delay Function - Steba BM 1 Mode D'emploi

Power failure backup system
The bread maker is equipped with a power failure backup system or memory. If the
power system is interrupted during the course of bread making, the process of ma-
king bread will be continued automatically within 20 minutes, even without pressing
the "Start/Stop" button. If the interruption time exceeds 20 minutes, the memory
cannot be kept and you must discard the ingredients in the bread pan and start
again. If the dough has not entered the rising phase when the power supply breaks
off, you can press the "Start/Stop" button directly to continue the program from the
beginning.
After the bread is baked
When the baking is complete, 10 beeps will sound to alert you that the bread is rea-
dy, and then the unit will automatically switch to a warm setting.
Important: The bread maker has an automatic "Keep warm" setting that will keep
your bread warm for up to 1 hour. Press the "Start/Stop" button for 3 seconds to
cancel the "Keep warm" setting.
Use pot holders or oven mitts to carefully lift the pan by its handle from the bread
maker.
Turn the pan upside down and gently shake it until the bread comes out.
The bread pan has a non-stick coated finish so that the bread should come out easily.
Do not use metal utensils to remove bread as they may scratch the non-stick coating.
Let the bread maker cool down thoroughly before using it again. If "HHH" appears in
the display window, it indicates that the unit has not cooled sufficiently after baking
to use immediately again. In this case, allow the bread maker to cool down for 10 – 20
minutes.

Delay function

The maximum delay time is 13 hours
E.g. it is 6:00 pm and you want to have your bread on the following day at 6:00 am.
First, press the "Menu" button and select the required program. Each time pressing
the "Up" and "Down" arrows you can increase/decrease the delayed start time by 10
minute increments. Set the delay time to 12:00.
∙ Press the "Menu" button until the required program is selected.
∙ Set the delayed time: you simply have to press the "Up" and "Down" arrows on the
control panel until the display panel reads 12:00 for 12 hours.
∙ Once you have set the time, press the "Start/Stop" button and in 12 hours fresh
bread will be ready by the time you get up.
Warning hints
If you have selected the "Jam" or the "Bake" program and the temperature inside the
appliance is higher than 80°, then the display screen will show "HHH" sign and will
not switch to the working mode. For the rest programs if the temperature exceeds
45°, then the same "HHH" sign will appear on the display screen. It means that the
unit has not cooled sufficiently after baking to use immediately again. Unplug the
unit and allow it to cool. If the display shows "EE1" sign, it means that the appliance is
still too hot. Wait for "EE0" sign to appear on the display, which means that the unit
has cooled down.
21