Roland V-Accordion FR-1 Guide Rapide page 11

Roland FR-1 – Quick Start
3. Setting up
Connections
The FR-1 has a compartment for 8 optional rechargeable Ni-MH (AA-type) batteries.
Consider purchasing such batteries when performing on stage.
Using the OUTPUT sockets
The FR-1 needs to be connected to an amplification system. If you are using optional batteries
and need to connect the FR-1 to a PA system or mixer, we recommend using a wireless system
to avoid having to use excessively long signal cables.
OUTPUT INPUT
L/MONO + R/MONO L + R
To a wall outlet
Use either a long signal cable (10m or more) or an optional wireless system (recommended).
You can also use the supplied earphones or a pair of optional headphones (Roland RH-30A,
RH-200, RH-200S or RH-300).
Note: To prevent malfunction and/or damage to speakers or other devices, always turn down the volume,
and turn off the power on all devices before making any connections.
Note: When using the supplied earphones, do not set the volume too high (i.e. past "12 o'clock") to avoid
distortion.
11