Connection Panel - Roland V-Accordion FR-1 Guide Rapide

FR-1 V-Accordion
Bass control panel
K Bass registers
These registers allow you to select the
desired bass (and chord) mix. They
include the following accordion footages:

Connection panel

M
L
L DC IN socket
This is where you can connect the sup-
plied power adaptor (PSB-1U). Note that
you can also purchase 8 optional batter-
ies and use the FR-1 without the adaptor.
M MIDI OUT/IN socket
This socket can be used to receive or
transmit MIDI data. Its function depends
on the setting of the "MIDI OUT/IN"
parameter (see the owner's manual for
details).
10
K
N OUTPUT L/MONO (TREBLE) & R/MONO
N
O
O PHONES socket
Bass registers
1 8'/4'/2'
2 16'/8'/8-4'/4'/2'
3 16'/2'
(BASS) sockets
These sockets can be connected to an
amplifier, a mixing console or a wireless
system.
This is where you can connect the sup-
plied earphones or optional stereo head-
phones (Roland RH-A30, RH-200s or
RH-300). Doing so does not mute the
OUTPUT sockets.
Note: When using the supplied earphones, do
not set the volume too high (i.e. past "12
o'clock") to avoid distortion.