Physipro Simulator Manuel D'utilisation page 20

ENGLISH
Footrest
The footrests are adjustable in height, width and angle, they can also be
removed to facilitate transfers. The footplates are adjustable in depth and angle.
Adjusting the height of the footrest
1. Press and hold lever A.
2. Move the footplate upwards or
downwards until the desired
height is obtained.
3. Release lever A.
Adjusting the width
1. Loosen handle B on both footrests.
2. Move footrests to the left or right
until the desired width between
both footrest is obtained.
3. Tighten both handles B.
Removing the footrests
1. To remove the footrests, unscrew
and take off end cap C from tube.
2. Loosen handle B.
3. Pull the footrest outwards until
completely removed from the tube.
20
Simulator
TM
A
C
B