Physipro Simulator Manuel D'utilisation page 16

ENGLISH
Anti-thrust wedge measurement system
This system helps determine the adequate thickness of an anti-thrust wedge
to limit forward migration.
1. Turn handle D, located at the back of the Simulator, until the desired height
is obtained;
2. With a ruler, measure the distance between the seat plate and the top of the
footrest support block.
Abductor mechanism and pommel
The push button abductor mechanism can be adjusted in height and moved laterally for
proper positioning of the pommel. This mechanism can also pivot under the seat when
the front button is pressed.
Adjusting the height of the pommel
1. Loosen handle E.
2. Adjust the height of the pommel.
3. Tighten handle E.
Adjusting the lateral position of the pommel
Loosen handle F located under the seat.
1.
2.
Slide the mechanism to the left or right
until properly positioned;
3. Tighten handle F.
Pivoting the pommel under the seat
1. Press button G.
2. Pivot the pommel under the seat.
D
16
Simulator
TM
E
F
G