Physipro Simulator Manuel D'utilisation page 18

ENGLISH
Adjusting the angle of the headrest
Loosen all three (3) screws F with a 4 mm
1.
Allen key.
2.
Move the headrest until properly angled.
3. Tighten all three (3) screws F.
Adjusting the lateral extensions
1. Loosen both screws G and both screws H.
2. Adjust the position and depth of the
lateral extension.
3. Tighten all screws G and H.
4. Loosen screw I.
5. Adjust the angle of the lateral extension.
6. Tighten screw I.
7. Repeat steps for the other side.
G
Headband
The headband is offered as an option. It is
installed with velcro fasteners that are
attached to the lateral extensions.
Note:
It is important that the headband is properly adjusted.
The headband should be tight enough to prevent the client's
head from dropping forward but should not cause discomfort.
Headband should be used under supervision of a caregiver.
H
I
18
Simulator
F
G
H
I
TM