Physipro Simulator Manuel D'utilisation page 15

Owner's Manual
Seat
Adjusting seat depth
To adjust seat depth follow these steps:
Press and hold handle A.
1. 1.
Pull or push the seat until the desired
2. 2.
depth is obtained.
3. 3. Release handle A.
Note: A ruler is located on the side of the
seat to facilitate seat depth measurement.
Adjusting the pelvic supports
Pelvic supports are adjustable in width and in depth.
Width adjustment
1. Loosen handles B.
2. Position the pelvic supports as desired;
3. Tighten handles B.
Depth adjustment
1. Loosen handles C;
2. Adjust the depth of the pelvic supports;
3. Tighten handles C.
B
C
15
ENGLISH
A
B
Febuary 2023