GB
IE
NI
Filling with Engine Oil and
Checking the Oil Level
Place the equipment on a level
base.
1. Unscr
dipstick (19) and pour oil into
the tank. The oil tank holds 0.47 l
oil. Use brand oil (e.g. SAE 30).
2. To check the oil level, wipe the
dipstick (19) on a clean cloth
and replace it in the tank until it
stops.
3. After pulling it out, read off
the oil level on the dipstick.
The oil level should be in
the marked area between
the minimum and maximum
marks (maximum: 0.47 litres
of engine oil in the oil
tank).
4. Wipe off any spilt oil and
Check the oil level every time be-
fore mowing and add oil before the
lower marking point is reached.
Filling with Petrol
hazardous to health:
-
Keep petrol in containers intended for
this purpose;
-
Only refuel outdoors and never with the
engine running or when the machine is
hot;
-
Open t
excess pressure to escape;
76
-
Do not smoke whilst refuelling;
-
Avoid skin contact and inhalation of
the fumes;
-
Remove spilt petrol;
-
Keep petrol away from sparks, open
-
Dispose of leftover petrol in an environ-
mentally friendly way (see "Disposal /
Environmental Protection").
- Do not use petrol/oil mixtures;
- Use normal or super unleaded
petrol;
- Only use clean, fresh petrol;
- Do not store petrol for longer
than one month, as its quality
deteriorates.
1. Unscr
entirely, to allow the petrol room
to expand.
2. Wipe away petrol residues
Operation
A certain level of noise exposure
caused by this device is unavoida -
ble. Rearrange noise-intensive works
this purpose. Comply with the rest
periods and reduce the work period
down to the minimum. For your per -
sonal protection and the protection
of people near by, suitable hearing
protection must be worn.
8)