Télécharger Imprimer la page

FLORABEST FBM 450 B2 Traduction Du Mode D'emploi Original page 78

Publicité

Les langues disponibles

Les langues disponibles

GB
IE
NI
nel;
- Before checking, cleaning or working
on the equipment;
- If a foreign body is struck. Look for
damage to the equipment and carry
out the necessary repairs before re-
starting and working with the equip-
ment;
- If the equipment starts to vibrate unu -
sually strongly, an immediate check
is required.
Switch off the engine, take out the
spark plug connector and ensure that
all moving parts are still:
- When leaving t he equipment;
- Before refuelling;
Do not leave the equipment unattended
in the workplace.
Do not work with equipment that is
damaged or incomplete or has been
converted without the approval of the
manufacturer.
Using machines for appl i cations other
than those intended may result in dan -
gerous situations.
Do not work with the device if there
is a risk of lightning strike. Danger of
electric shock.
Maintenance and Storage:
Ensure that all nuts, bolts and screws
is in safe working condition. Many
accidents are caused by poorly main-
tained equipment.
Do not keep the equipment with petrol
in the tank inside a building in which
petrol fumes could potentially come into
Allow the engine to cool before placing
the equipment in enclosed spaces. Risk
74
T
gine, exhaust and area around the fuel
tank free of grass, leaves or leaking
grease (oil).
Check the grass catcher regularly for
wear or loss of function.
For reasons of safety, replace worn or
damaged parts. Replace defective si-
lencers.
If the fuel tank is to be drained, do this
outdoors.
Handle your equipment with care. Keep
the tools sharp and clean to enable you
to work better and more safely. Follow
the maintenance directions.
Do not attempt to repair the equipment
yourself unless you are trained to do so.
tions is to be carried out only by cus-
tomer service centres authorised by us.
Keep the equipment in a dry place and
out of reach of children. Machines are
dangerous if used by inexperienced
people.
Initial Operation
Caution! Risk of injury from
rotating blades. Carry out
work on the equipment only
when the blade is switched
off and stationary.
Observe the Briggs & Stratton in-
struction manual supplied.
Before starting the device, you must
-
remove all transport safety devices,
-
fold up the grip rod and lock the quick-
release levers,
-
l in motor oil,
-
l in petrol,
-
mount the grass catcher if necessary,
-
set the cutting height if necessary.
-
-

Publicité

loading