18 Troubleshooting
18 Troubleshooting
18.1 Troubleshooting Shrub Shears, Battery and Charger
Condition
LEDs on charger
Shrub shears do not
start when switched
on.
Shrub shears cut out
during operation.
0458-708-9621-A
Cause
Battery has low charge.
Battery too hot or too cold. ► Remove the battery.
There is a malfunction in
the shrub shears.
Cutting blades do not run
freely.
Shrub shears are too hot.
There is a malfunction in
the battery.
No electrical contact
between the shrub shears
and battery.
Shrub shears or battery
damp.
Shrub shears are too hot.
Remedy
► Charge the battery.
► Allow battery to cool down / warm up.
► Remove the battery.
► Clean contacts in battery compartment.
► Fit the battery.
► Switch on the shrub shears.
► If shrub shears still do not start when switched on:
Do not use your shrub shears and contact your
STIHL servicing dealer.
► Spray both sides of blades with STIHL resin
solvent.
► If shrub shears still do not start when switched on:
Do not use your shrub shears and contact your
STIHL servicing dealer.
► Remove the battery.
► Allow the shrub shears to cool down.
► Remove battery and insert it again.
► Switch on the shrub shears.
► If shrub shears still do not start when switched on:
Do not use the battery and contact your STIHL
dealer for assistance.
► Remove battery and insert it again.
► Allow shrub shears or battery to dry.
► Remove the battery.
► Allow the shrub shears to cool down.
English
49