Section 8 : Daily Inspection - Polaris PROSPECTOR PRO SR Manuel D'installation

RANGER PROSPECTOR PRO SR TRACK KIT
KIT PN 2878074

SECTION 8 : DAILY INSPECTION

Visually inspect Track Kit before your ride and be sure that every part is in good condition. Adjust or replace parts as
needed
• Verify fastener torque.
• Verify wheels spin freely.
• Verify the front and rear anti-rotation arms adjustment.
• Verify if the front and rear anti-rotation arms work properly.
• Verify the track tension.
ATTENTION : If the Track Kit is stored for more than four consecutive weeks in a wet place or with water in
bearings, damage could be done to the bearings.
WARNING
Anything strange or unusual noise or behaviour of
your vehicle and track kit must be thoroughly
investigate any potential problem must be corrected
before using the vehicle.
2510309
A-2510309-1
- 29 -