Figure 2 - Warning Decal Location - Polaris PROSPECTOR PRO SR Manuel D'installation

RANGER PROSPECTOR PRO SR TRACK KIT
KIT PN 2878074
WARNING
YOU MUST REMOVE ALL THE COMPONENTS
OF THE TRACK KIT BEFORE INSTALLING
THE ORIGINAL WHEELS ON YOUR UTV. Any
parts left over on your UTV could get damaged
and/or make the vehicle lose control due to the
potential encounter with debris. As a result, there is
a risk of personal physical injury and of damage to
the vehicle.
WARNING
Adjustments and tightening inspection of the
attachments should be performed after two hours of
use following each repair and/or replacement of a
component of the Track Kit.
WARNING
Inspect and retighten the bolts of the Track Kit after
two hours of use.

Figure 2 - Warning decal location

2510309
A-2510309-1
WARNING
Perform a visual check of the Track Kit before each
use. Make sure all the components are in good
condition and properly secured. Operating a vehicle
that has a damaged component may extend the
damage to other parts.
WARNING
Track elongation is normal during the initial use of
the Track Kit, generally within the first hour of use.
Thus, it is important to readjust track tension to
prevent tooth skipping and premature wear of the
track and of the sprocket.
WARNING
Perform a thorough inspection of the vehicle
annually.
- 8 -