Diamond D115-EK Mode D'emploi page 8

Page. 8
B
C
D
E
The machine with conveyor racks are continuously functioning and
therefore need particularly effective lowered drains.
Consult the separately provided installation diagram to position the
drains.
Connect the machine drains to the drainage system using pipes able
to withstand a constant 70°C temperature.
The floor discharge must be provided with a poultry stack.
It is possible to use the outlet tube and fitting
2.6 VARIATIONS FOR APPLIANCES FITTED WITH
Before positioning the appliance, it is necessary to attach the battery
breather.
- Tighten the outlet fitting "A" to the appliance outlet stack (fitting
supplied).
- Attach the black tube "B", reachable from the back panel, to the rubber
door "C"
- Carefully tighten the supplied tie strip.
- Attach the outlet tube and carefully tighten the tie strip supplied.
A
- Finally for the "water inlet" connection, it is necessary to remove the
front panel:
2.5 CONNECTION TO THE DRAIN LINE
provided.
VAPOUR CONDENSER
GB