Télécharger Imprimer la page

Diamond D115-EK Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
GB
Never open the door quickly if the cycle has not finished.
Do not put bare hands into the wash solution.
Never remove the machine panels if the power upline has not been turned off.
The professionally trained personnel who install the machine and connect the electricity, will
explain to the user how to operate the machine and which safety measures to use.
The installer will provide practical demonstrations and leave written instructions which are
provided with the machine.
This machine is only to be used for the purpose for which it was designed. Any other use
is considered improper and dangerous.
The machine is not to be used by untrained personnel.
Never use the machine if any of the protections (microswitches, panels or other) provided by the
manufacturer are missing.
Do not use the machine to wash objects not compatible with those indicated by the
manufacturer.
All repair work must be done by the manufacturer or an authorized service center using original
spare parts.
Failure to observe this may affect the safety of the machine.
The power supply should be turned off when the machine is not being used
For models with drying feature, do not leave objects on intake grid
Remember that the machine must never be started without its special protective curtains: at the
inlet and outlet, and in intermediate positions.
Ambient Temperature : 40°Cmax /4°Cmin ( average 30°C)
Altitude
Relative humidity
Transport and Storage : between 10°C and 55°C with peack until 70°C ( max 24 hrs )
3-
HEATING SELECTION
ON ⇒ Machine operating at the same time as the tub heating
elements and boiler.
OFF ⇒ Machine with operation alternating with the tub heating
elements and boiler.
4-
BOILER HEATING SELECTION
ON ⇒ Machine with rapid boiler heating element heating.
OFF ⇒ Machine with slow boiler heating element heating.
CAUTION:
Never position during first installation if you are uncertain (see 2.7)
CAP.3
3.1
: until 2000 metrical
: max 30% at 40°C / max 90% at 20°C
SAFETY RECOMMENDATIONS
RESIDUAL RISKS AND WARNING
3.2
NORMAL SERVICE CONDITIONS
Page. 11

Publicité

loading

Ce manuel est également adapté pour:

Gl80