Starting Operation; Components And Controls - Pulsar AXION LRF XQ38 Guide Rapide

ENGLISH

Starting Operation

POWERING ON AND IMAGE SETTING
• Open the lens cover (7). Secure the cover with to the strap using the built-in
magnet in the cover.
• Press the ON/OFF button
• Adjust the eyepiece diopter ring
symbols in the display are sharp.
• Rotate the lens focus knob
• Enter the main menu with a long press of the MENU button
desired calibration mode: manual (M), semi-automatic (SA) or automatic (A).
• Calibrate the image by briefly pressing the ON/OFF button
calibration mode has been selected). Close the lens cover when calibrating
manually.
• Select the desired observation mode ("Forest", "Identification", "Rocks",
"User") by briefly pressing the UP button (4). User mode allows you to change
and save user brightness and contrast settings in the quick menu.
• Enter the main menu with a long press of the MENU button
appropriate colour palette (for more details see the Main menu functions
section in the full version of the manual).
• Activate the quick menu by briefly pressing the MENU button
brightness, contrast and smooth digital zoom of the display (see the Quick
Menu Functions section of the full version manual for details).
• Upon completion of use turn the device off by a long press of the ON button
(5).

Components and controls

1. Eyepiece diopter ring
2. DOWN/LRF button
3. MENU button
4. UP/ZOOM button
5. Power ON/
Calibration button
6. Lens focus knob
7. Lens cover
8. Adaptor mount
for tripod
9. USB Type-C
connector
10. Laser rangefinder
1
ENGLISH
(5)
briefly to turn on the device.
(1)
of your daylight optical device until the
(6)
to focus on the object being observed.
(3)
and select the
(5)
(if the SA or M
(3)
and select the
(3)
to adjust the