Pulsar AXION LRF XQ38 Guide Rapide page 5

LED indicator displays the current status of the device:
LED Indicator Operating Mode
Device is turned on
The device is turned on/battery charge < 10%
Buttons Operation
Short press
Turn on device
ON/OFF
button Turn on display
(5)
Device calibration
UP/ZOOM
Switch observation modes
button
Menu navigation up / right
(4)
Enter quick menu
MENU
Switch between quick menu
button
items
(3)
Confirm selection
Activate the rangefinder
DOWN/
Distance measurement
LRF
Deactivate the rangefinder scan
button
mode
(2)
Menu navigation down / left
Battery Pack Charging
The AXION LRF XQ thermal imagers come with APS
5 rechargeable lithium-ion battery. APS 5 batteries
support USB Power Delivery fast charging technology
when using a standard charging set (Charger, USB
Type-C cable, Power Adapter). Before first use, the
battery should be charged.
Option 1
• Install the battery
(19)
of the device.
• Connect the USB cable
(9)
connector of the device.
• Connect the other end of the USB cable
Power Adapter (15).
• Plug the Power Adapter
(17).
Option 2
• Insert the rechargeable battery
into the APS 5 charger slot
Fig.). The APS charger is supplied with your device or
(11)
in the battery compartment
(16)
to the USB Type-C
(15)
into a 100-240 V socket
(11)
along the guide
(12)
as far as it will go (see
Long press
Turn off device
Turn off display
Zoom
Exit quick menu
Enter / exit main menu
Quick change of color
palettes
Activate the rangefinder scan
mode
Deactivate the rangefinder
(16)
to the
2
ENGLISH