Publicité
General
We appreciate your choice of a new product from R82 - a worldwide supplier of technical aids and ap-
pliances for children and teenagers with special needs. To fully benefit from the options offered by this
product please read this User Guide before use and save it for future reference.
Intended purpose
The High-low:xo is a frame for a seating system
for children and adults with disabilities.
Indications
The device is used together with a seating
system (i.e. a modular seating system like R82
x:panda or R82 Panda Futura). It can be used
by children and adults with disabilities, who
lack the ability to maintain a seated position
and move around (Within the room or between
rooms / outdoors) without an assistive device.
The target group for the device is based on
functional ability and anthropometry. It is not
based on a specific health condition or age.
The user is the person sitting in the device.
The caregiver is the person operating the
device. Never leave the user unattended in
this device. Ensure permanent supervision by
a caregiver.
The use of the device will be discontinued
more times during the day where the user will
be lying down, standing or sitting in another
assistive device or a conventional product.
The outdoor version of the device is approved
for transportation for children and adults in
the weight range of 22 kg to specified max
user weight for transportation.
Contra indications
None.
Precautions
None.
Application areas
The product is for indoor and outdoor use.
Enclosed tools
None.
Declaration of Conformity
This product conforms to the requirements of
the Medical Devices Regulation (2017/745).
Further, this product conforms to the require-
ments according to:
• High-low:xo indoor: EN 12182
• High-low:xo outdoor: EN 12182 & EN
12183
The CE mark must be removed when:
• Rebuilding the product
• Using the product outside the intended
purpose and declaration of conformity
• Using other than original R82 spare parts
EN
ENGLISH
and fittings.
When combining the device with other prod-
ucts, the combination must not change the
intended purpose of the products or modify
the products in such a way that compliance
with the applicable requirements may be af-
fected. The person / company responsible for
the combination of the products must ensure
that the applicable requirements are fulfilled.
Applicable requirements examples:
• Alignment of user weight/mass of the
combined seat and base, approval for
transportation in vehicles of both products
(ISO16840-4 for seat and ISO7176-19 for
base)
• Material safety (biocompatibility, flam-
mability), mechanical safety (stability,
squeezing hazards, inter connection),
electrical safety.
Disposal
When a product reaches the end of its lifetime,
it should be separated by material type so
that the parts can be recycled or disposed of
properly. If required, please contact your local
dealer for a precise description of each mate-
rial. Please contact your local authorities to be
informed of the options available for recycling
in an environmentally-friendly way.
Accessories and spare parts
The products from R82 can be supplied with
a variety of accessories including vests and
belts which comply with the needs of the
individual user. Spare parts can be ordered on
request. Find the specific accessories on our
website or contact your local dealer for further
information.
R82 Warranty
www.etac.com/support
Presales information and instructions
Presales information and instructions are
available at www.etac.com, under your prod-
uct, in the documents section.
41
etac.com
Publicité
