VATECH Green X 18 Mode D'emploi page 16

1. Imaging System Overview
1.6.2 Emergency Stop Switch
During operation, the following emergencies may occur:
•
•
•
When you encounter any of the situations above in the middle of the operation, press
the red Emergency Stop Switch to cut off the power supply and stop the equipment.
To restart the equipment, turn the Emergency Stop Switch clockwise until it pops up.
The Emergency Stop Switch is located under the Handle Frame.
8
X-ray emission continues even after the Exposure Switch has been
released
Physical injury to the patient or damage to the equipment
Other emergencies
TM
Green X 18 (Model: PHT-75CHS) User Manual