Publicité
Les langues disponibles
Les langues disponibles
AIR PANEL P-AP56NAMS
•
The indoor unit height is adjustable from the corner hole if the
levelness of the indoor unit, the drain piping, etc. are not affected by
the adjustment.
Wrench
?
N O T E
The significant height adjustment will cause water leakage from the drain
pan.
!
C A U T I O N
•
If using a forming agent after installing the air panel, avoid touching
the forming agent to the air panel.
•
If the forming agent is touched to the air panel, it may cause the
breakage and the falling down the air panel. In this case, completely
wipe off the touched forming agent.
10 Attachment of corner pocket cover
Attach the corner pocket covers (4 portions) after the air
panel is mounted completely.
a. Catch the band at the rear side of the corner pocket
cover onto the projection at the air panel as shown in the
figure below.
Projection
Strap
Ⓐ
Fixing hook
?
N O T E
Catch securely the strap onto the projection. If not, the comer pocket
cover may fall down when removing it so that may cause injury.
12
PMML0570 rev.0 - 01/2021
A
B
A
?
Catch securely the fixing hooks of the corner pocket cover to the air panel.
Ⓑ
Fixing hook
b. Insert the fixing hooks (2 portions) at Ⓐ to the air panel
and insert the fixing hook (1 portion) at Ⓑ to the air panel.
A
A
N O T E
B
Publicité
